CNET cn5614xr Specifications download pdf (Page 8)

System Preparation and Conﬁguration

1-2

◆

Section 1: Installing the Cabinet

DS2000 Hardware Manual

Expanded Database

The Expanded Database is a new database method that provides database records (memory) for all

possible extensions, trunks, Hunt Groups, Ring Groups, and Voice Mail ports. This new capability

allows for:

●

Automatic Slot Conﬁguration.

●

Simpliﬁed installation of Voice Mail, Hunt Groups, and Ring Groups.

●

Support for built-in UltraMail and IntraMail Voice Mail

●

Introduction of the DS-Series PC Program.

To understand the Expanded Database, you’ll need to keep track of three things: port, station (or

trunk) number, and extension number.

●

Port

The port is where the device you are programming connects to the system. For example, each

16DSTU PCB has 16 ports which can connect up to 16 digital telephones. Ports are numbered

consecutively for each slot, and only exist when you plug in the PCB to which the device

should connect.

●

Station Number and Trunk Number

The station or trunk number is the element in software that keeps track of the connected

devices’s programming. Station and trunk numbers (and associated database records) exist for

all possible devices you can connect to the system, even if you don’t have any ports installed

to connect them. You can’t call station and trunk numbers directly - you need the associated

extension numbers to do that (see below).

●

Extension Numbers

Extension numbers allow you to access the stations and trunks. By default, each station and

trunk number has an extension number assigned to it. You can change these assignments if

you want to.

- Digital station ports have primary and secondary station numbers. The primary station’s

extension number is used to call the device connected to the port. The secondary station’s

extension number calls the second channel on 2-channel devices such as 2-OPX Modules

and Digital VANGARD Voice Mail ports.

DS2000 Default Numbering

Here is how the ports, station numbers, trunk numbers, and extension numbers are initially set up.

Default Numbering in DS2000

Stations (Telephones) Ports Station Numbers Extension Numbers

Station

Set by installed PCB 1-96

300-395

Unassigned

32 97-128

396-427

Total Station Ports

128

•To ﬁnd out the default extension number for any station number,

add 299

to the station number.

- For example, station number

uses extension number

300

(1 + 299).

Trunks Ports Trunk Numbers Extension Numbers

Trunk Ports

Set by installed PCB

1-64 101-164

Total Trunk Ports

•To ﬁnd out the default extension number for a trunk number,

add 100

to the trunk number.

- For example, trunk number

uses extension number

101

(1 + 100).

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 85 86

Comments to this Manuals

No comments

CNET cn5614xr Specifications Page 8

Comments to this Manuals

Related products and manuals for Networking CNET cn5614xr