CNET cn5614xr Specifications download pdf (Page 43)

Connecting Extensions

DS2000 Hardware Manual Section 3: Installing Extensions and Trunks ◆ 3-1

Section 3: Installing

Extensions and Trunks

Connecting Extensions

Each 16DSTU PCB connects 16 digital extensions. Each 8ASTU PCB connects 8 analog extensions. Each

4ASTU PCB connects 4 analog extensions.

To connect extensions (Figure 3-1):

1. Using Figure 2-17 Connecting 16DSTU Digital Station and 4/8ASTU Analog Station PCBs on page 2-

15 as a guide, insert the mod jacks into the appropriate connector on the PCB.

2. Install a modular jack for each extension within 6 feet of the telephone’s location.

3. For each extension, run one-pair 24 AWG station cable from the cross-connect block to the modular jack.

4. Terminate the station cable WHT/BLU - BLU/WHT leads to the RED and GRN lugs in the modular jack.

5. Back at the main equipment location, run one pair of cross-connect wire between the pins on the B

block and cross-connect block to complete the connection.

6. Install bridging clips as required.

Figure 3-1: Connecting Extensions

625

Modular

Jack

25-Pair

Installation Cable

(P/N 80892)

BLK

YEL

RED

GRN

BLU-WHT

WHT-BLU

Cross

Connect

Block

One-Pair

Cross Connect

Station

Block

80000 - 36B

You can also connect analog extensions to 2-OPX

Modules. Refer to Section 4, Optional Equipment.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 85 86

No comments

CNET cn5614xr Specifications Page 43