5-14 User Manual
Command Description Function
&Fn Restore Factory
Configuration
None
&Gn Select Guard
Tone
0 = Disable ( default )
1 = 550 Hz
2 = 1800 Hz
&Kn Flow Control 0 = Disable
3 = Enable RTS/CTS flow control
( default )
4 = Enable XON/XOFF flow control
&Pn Dial pulse ratio 0 = Sets 10-pps pulse dial with
39%/61% make/break
1 = Sets 10-pps pulse dial with
33%/67% make/break
&Sn DSR Override 0 = DSR always on ( default )
1 = DSR active only during
handshaking and when carrier
is lost
&Tn Self Test
commands
0 = Terminates test in progress
( default )
1 = Initiates local analog
loopback
&Vn View active and
stored profiles
0 = View active profile and stored
profile 0
1 = View active profile and stored
profile 1
&Wn Store Current
Configuration
0 = Store current configuration as
profile 0
1 = Store current configuration as
profile 1
&Yn Designate a
Default Reset
Profile
0 = Use profile 0 on power up
( default )
1 = Use profile 1 on power up
&Zn=X Store Telephone
Number (0-3)
(up to 30 digits)
0 to 3 Specified telephone number
ID
x up to 30 digits for the telephone
Comments to this Manuals